|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Rotary Tooling |
Home >
Rotary Tooling > HYDRAULIC CHUCK
|
 |
|
|
|
|
HYDRAULIC CHUCK (SHORT & RIGID) CAT
|
|
|
|
|
|
|
|
 HYDRAULIC CHUCK (SHORT & RIGID) CAT |
| TAPER NO. |
MODEL No. |
d1 |
D1 |
D2 |
L |
L2 |
G |
EDP NO. |
| 40 | CAT40AD/B - HC 1/2S - 2.52 | 0.500 | 1.260 | 1.654 | 2.520 | 1.457 | M8x1.0mm | WK020SNR |
| CAT40AD/B - HC 5/8S - 2.52 | 0.625 | 1.362 | 1.752 | 2.520 | 1.654 | M10x1.0mm | WK021SNR |
| CAT40AD/B - HC 3/4S - 2.52 | 0.750 | 1.512 | 1.752 | 2.520 | 1.654 | M10x1.0mm | WK022SNR |
| CAT40AD/B - HC 1S - 2.52 | 1.000 | 2.244 | 2.598 | 3.500 | 1.890 | M16x1.0mm | WK024SNR |
| 50 | CAT50AD/B - HC 1/2S - 3.19 | 0.500 | 1.879 | 2.752 | 3.189 | 1.457 | M8x1.0mm | WL020SNR |
| CAT50AD/B - HC 5/8S - 3.19 | 0.625 | 1.811 | 2.752 | 3.189 | 1.654 | M10x1.0mm | WL022SNR |
| CAT50AD/B - HC 3/4S - 3.19 | 0.750 | 2.185 | 2.752 | 3.189 | 2.165 | M10x1.0mm | WL024SNR |
| CAT50AD/B - HC 1S - 3.19 | 1.000 | 2.185 | 2.752 | 3.189 | 2.165 | M16x1.0mm | WL026SNR |
| CAT50AD/B - HC 1 1/4S - 3.19 | 1.250 | 2.185 | 2.752 | 3.189 | 2.165 | M16x1.0mm | WL028SNR |
| | | | | | | | |
| | | | | | | | Unit : mm |
| TAPER NO. | MODEL No. | d1 | D1 | D2 | L | L2 | G | EDP NO. |
| 40 | CAT40 AD/B-HC12S-50 | 12 | 32 | 42 | 50 | 37 | M8X1.0mm | WK100SNR |
| CAT40 AD/B-HC20S-64.5 | 20 | 38 | 49.25 | 64.5 | 42 | M16X1.0mm | WK102SNR |
| 50 | CAT50 AD/B-HC12S-50 | 12 | 32 | 42 | 50 | 37 | M8X1.0mm | WL100SNR |
| 50 | CAT50 AD/B-HC20S-64.5 | 20 | 38 | 49.5 | 64.5 | 42 | M16X1.0mm | WL102SNR |
| 50 | CAT50 AD/B-HC32S-81 | 32 | 55 | 72 | 81 | 55 | M16X1.0mm | WL104SNR |
|
|
 |
|
